Measurement and Instrumentation Jewels are used in instruments for the purpose of Suppressing noise Damping Bearing Torque control Suppressing noise Damping Bearing Torque control ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. This is to have full deflection when 100V is measured. What is the value of series resistor to be used? 99.99 K ohms 100 ohms 99.99 ohms 100 K ohms 99.99 K ohms 100 ohms 99.99 ohms 100 K ohms ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is Faulty Short-circuited None of these All right Faulty Short-circuited None of these All right ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The measurment of very low and very high frequencies is invariably done using a frequency counter in which one of the following? Period and frequency measurement modes respectively. Frequency and period measurment modes, respectively. Frequency measurment modes only. Period measurment modes only. Period and frequency measurement modes respectively. Frequency and period measurment modes, respectively. Frequency measurment modes only. Period measurment modes only. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 10 mA. 0.5 mA. 1mA. 100 mA. 10 mA. 0.5 mA. 1mA. 100 mA. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The quantity 1/√(∈0 × μ0) in SI units has the both ‘a’ and ‘b’. dimension LT-1. none of these. speed of light. both ‘a’ and ‘b’. dimension LT-1. none of these. speed of light. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS