Heat Transfer jH factor for heat transfer depends upon the __________ number. Prandtl Reynolds Nusselt Biot Prandtl Reynolds Nusselt Biot ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In a laboratory test run, the rate of drying was found to be 0.5 x 10-3 kg/m².s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m²/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is 6000 4000 2000 5000 6000 4000 2000 5000 ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In case of heat transfer by conduction in a hollow cylinder, __________ mean area is used to calculate the heat transfer rate. Either A, B or C Arithmetic Logarithmic Geometric Either A, B or C Arithmetic Logarithmic Geometric ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer The unit of conductance in SI unit is W/m°K W/m² W/°K W/m W/m°K W/m² W/°K W/m ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In Biot number, the characteristic length used is the ratio of the __________ of the solid. Volume to surface area Surface area to volume Perimeter to surface area Surface area to perimeter Volume to surface area Surface area to volume Perimeter to surface area Surface area to perimeter ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer In the free convection regime of pool boiling, the heat flux is proportional to Δt2 Δt5/4 Δt Δt1/2 Δt2 Δt5/4 Δt Δt1/2 ANSWER DOWNLOAD EXAMIANS APP