Microwave Communication It is possible to increase the maximum range of a radar equipment by All of these Lowering the pulse frequency Narrowing the beam width and increasing the pulse duration Raising the peak power of the transmitter All of these Lowering the pulse frequency Narrowing the beam width and increasing the pulse duration Raising the peak power of the transmitter ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication If k-factor is greater than 1, the array beam is bent Towards the outer space Towards the earth Away from the earth Towards the ionosphere, Towards the outer space Towards the earth Away from the earth Towards the ionosphere, ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication If the duration of the radar transmitted pulse, on a particular range of operation, is increased, the required bandwidth of the receiver’s IF amplifiers May be decreased Must be doubled Must remain as before Must be increased May be decreased Must be doubled Must remain as before Must be increased ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication In a pulsed radar set, the STC circuit is used to Vary the pulse frequency in order to control the maximum target Reduce interference from the effects of sea return Increases receiver sensitivity for echoes from targets Improve the target bearing resolution Vary the pulse frequency in order to control the maximum target Reduce interference from the effects of sea return Increases receiver sensitivity for echoes from targets Improve the target bearing resolution ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication A traveling-wave tube (TWT) amplifies by virtue of The effect of an external magnetic field The energy liberated form the collector The absorption of energy by the signal from an electron stream The energy contained the cavity resonators The effect of an external magnetic field The energy liberated form the collector The absorption of energy by the signal from an electron stream The energy contained the cavity resonators ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication In a pulsed radar set, the function of the duplexer is to Allow the transmitter and the receiver to operate from a common antenna Aid in calibrating the display unit All of these Prevent frequency drift in the klystron Allow the transmitter and the receiver to operate from a common antenna Aid in calibrating the display unit All of these Prevent frequency drift in the klystron ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS