Engineering Materials In which of the following cases, consideration of creep is important Cast iron pipes Cycle chains Flywheel of steam engine Gas turbine blades Cast iron pipes Cycle chains Flywheel of steam engine Gas turbine blades ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials In spheroidising process, the steel is Heated below the lower critical temperature and then cooled slowly Heated up to the lower critical temperature and then cooled in still air None of these Heated slightly above the lower critical temperature and then cooled slowly to a temperature of 600°C Heated below the lower critical temperature and then cooled slowly Heated up to the lower critical temperature and then cooled in still air None of these Heated slightly above the lower critical temperature and then cooled slowly to a temperature of 600°C ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Solder is an alloy consisting of Tin and copper Lead and zinc Tin, antimony, copper Tin and lead Tin and copper Lead and zinc Tin, antimony, copper Tin and lead ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Weld decay is the phenomenon found with Cast iron Mild steel Stainless steel Nonferrous materials Cast iron Mild steel Stainless steel Nonferrous materials ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Y-alloy contains 5 to 6% tin, 2 to 3% copper and rest aluminium 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium 5 to 6% tin, 2 to 3% copper and rest aluminium 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Following elements have face-centered cubic structure A iron (below 910°C and between 1400 to 1539°C), W Mg, Zn, Ti, Zr, Br, Cd All of these Gamma iron (910° to 1400°C), Cu, Ag, Au, Al, Ni, Pb, Pt A iron (below 910°C and between 1400 to 1539°C), W Mg, Zn, Ti, Zr, Br, Cd All of these Gamma iron (910° to 1400°C), Cu, Ag, Au, Al, Ni, Pb, Pt ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS