Electrical Machines In shaded pole induction motors, the flux moves from ------------- region to ----------------- region respectively? unshaded, shaded shaded, shaded shaded, unshaded unshaded, unshaded unshaded, shaded shaded, shaded shaded, unshaded unshaded, unshaded ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines If a DC motor is connected across the AC supply it will Burn. Run at normal speed. Not run. Run at lower speed. Burn. Run at normal speed. Not run. Run at lower speed. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The rotor slots are slightly skewed in squirrel cage induction motor to increase the strength of rotor bars. reduce the magnetic hum and locking tendency of rotor. provide ease of fabrication. decrease the amount of copper to be used. increase the strength of rotor bars. reduce the magnetic hum and locking tendency of rotor. provide ease of fabrication. decrease the amount of copper to be used. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Where the shunt generators are widely used? Where the load is very high. Where often load fluctuation is occurred. Where a constant voltage is required over a narrow load range. Where voltage variation is needed over a wide load range. Where the load is very high. Where often load fluctuation is occurred. Where a constant voltage is required over a narrow load range. Where voltage variation is needed over a wide load range. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements about commutating poles which are fitted on most large dc Shunt motors: 1. The commutating poles are placed in the geometric neutral plane and their number is usually Equal to the number of main poles 2. The winding on the commutating poles is connected in series with the shunt-field winding on the main poles 3. The polarity of the commutating pole must be that of the next pole further ahead 4. The commutating poles neutralize the reactance voltage produced in the coil undergoing Commutation. Of these statements, 1 and 4 are correct 2, 3 and 4 are correct 1, 2 and 4 are correct 1, 2 and 3 are correct 1 and 4 are correct 2, 3 and 4 are correct 1, 2 and 4 are correct 1, 2 and 3 are correct ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines For a DC Shunt Motor having armature resistance of 0.5 Ω and 2 A armature current at no-load, when the armature current is changed to 20 A at loaded condition the speed is 1000 r.p.m. What is the speed at no-load? 1037.5 r.p.m. 4575.4 r.p.m. none of above. 1130 r.p.m. 1037.5 r.p.m. 4575.4 r.p.m. none of above. 1130 r.p.m. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS