Hydraulics and Fluid Mechanics in ME In order to measure the flow with a Venturimeter, it is installed in Horizontal line Inclined line with flow upwards Inclined line with flow downwards Any direction and in any location Horizontal line Inclined line with flow upwards Inclined line with flow downwards Any direction and in any location ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME The critical depth for a channel is given by (where q = Unit discharge (discharge per unit width) through the channel) (q³/g)1/4 (q²/g)1/3 (q⁴/g)1/5 (q/g)1/2 (q³/g)1/4 (q²/g)1/3 (q⁴/g)1/5 (q/g)1/2 ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME A differential manometer is used to measure Difference of pressures between two points in a pipe Pressure in Venturimeter Atmospheric pressure Pressure in pipes and channels Difference of pressures between two points in a pipe Pressure in Venturimeter Atmospheric pressure Pressure in pipes and channels ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME The discharge through a wholly drowned orifice is given by (where H1 = Height of water (on the upstream side) above the top of the orifice, H2 = Height of water (on the downstream side) above the bottom of the orifice, and H = Difference between two water levels on either side of the orifice) Q = Cd × b (H2 - H1) × √(2gh) Q = Cd × bH × √(2gh) Q = Cd × bH₁ × √(2gh) Q = Cd × bH2 × √(2gh) Q = Cd × b (H2 - H1) × √(2gh) Q = Cd × bH × √(2gh) Q = Cd × bH₁ × √(2gh) Q = Cd × bH2 × √(2gh) ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME A flow in which the volume of a fluid and its density does not change during the flow is called _________ flow. Viscous None of these Compressible Incompressible Viscous None of these Compressible Incompressible ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Runaway speed of a hydraulic turbine is The speed corresponding to maximum overload permissible The speed if the turbine runner is allowed to revolve freely without load and with the wicket gates wide open Full load speed The speed at which turbine runner will be damaged The speed corresponding to maximum overload permissible The speed if the turbine runner is allowed to revolve freely without load and with the wicket gates wide open Full load speed The speed at which turbine runner will be damaged ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS