Workshop Technology In forehand welding, the weld is made Either from left to right or from right to left From left to right First from left to right and then from right to left From right to left Either from left to right or from right to left From left to right First from left to right and then from right to left From right to left ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In order to ram the sand harder at the back of the mould and softer on the pattern face, a ________ is used. Jolt machine Stripper plate machine Squeezing machine Sand slinger Jolt machine Stripper plate machine Squeezing machine Sand slinger ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The purpose of a gate is to Delivers molten metal into the mould cavity Delivers molten metal from pouring basin to gate Feed the molten metal to the casting in order to compensate for the shrinkage Act as a reservoir for the molten metal Delivers molten metal into the mould cavity Delivers molten metal from pouring basin to gate Feed the molten metal to the casting in order to compensate for the shrinkage Act as a reservoir for the molten metal ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For gas welding, the pressure desired at the welding torch for oxygen is 7 to 103 kN/m² 560 to 840 kN/m² 280 to 560 kN/m² 70 to 280 kN/m² 7 to 103 kN/m² 560 to 840 kN/m² 280 to 560 kN/m² 70 to 280 kN/m² ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology When a pattern is made in three parts, the top part, is known as a Drag Cope None of these Cheek Drag Cope None of these Cheek ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The chisel used for cutting key ways is Cape chisel Round nose chisel Flat chisel Diamond pointed chisel Cape chisel Round nose chisel Flat chisel Diamond pointed chisel ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS