Power Systems In coal fired thermal power stations, what are the electrostatic precipitators used for? To collect the dust particles from the flue gases To remove dust particles setting on the bus bar conductors in the station switch yard All of these To keep the air heaters clean To collect the dust particles from the flue gases To remove dust particles setting on the bus bar conductors in the station switch yard All of these To keep the air heaters clean ANSWER DOWNLOAD EXAMIANS APP
Power Systems Maximum power transfer in a transmission line can be obtained by reducing reactance either 1 or 2 None of these increasing voltage level reducing reactance either 1 or 2 None of these increasing voltage level ANSWER DOWNLOAD EXAMIANS APP
Power Systems A load centre is at an equidistant from the two thermal generating stations G1 and G2. The fuel cost characteristics of the generating stations are given by F1 = a + bP1 + cP²1 F2 = a + b P2 + 2cP²2 Where P1 and P2 are the generation in MW of G1 and G2, respectively. For most economic generation to meet 300 MW of load, P1 and P2 respectively, are 175, 125 100, 200 150, 150 200, 100 175, 125 100, 200 150, 150 200, 100 ANSWER DOWNLOAD EXAMIANS APP
Power Systems When bundle conductor are used in place of single conductor the effective inductance and capacitance will respectively decrease and increase. decrease and remain unaffected. increase and remain unaffected. increase and decrease. decrease and increase. decrease and remain unaffected. increase and remain unaffected. increase and decrease. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A thermal protection switch is used to provide protection against overload. temperature. short circuit. over voltage. overload. temperature. short circuit. over voltage. ANSWER DOWNLOAD EXAMIANS APP
Power Systems An over current relay, having a current setting of 125% connected to a supply circuit through a current transformer of ratio 400/5. The pick up value is 12.5 A 6.25 A 15 A 10 A 12.5 A 6.25 A 15 A 10 A ANSWER DOWNLOAD EXAMIANS APP