Engineering Drawing In architectural drawing ________ are often used to illustrate and detail structural components. Foundation beam detail sections All of these Wall sections Building sections Foundation beam detail sections All of these Wall sections Building sections ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________. 3/4" = 1'-0" 1/4" = 1'-0" 1" = 100' 1/8" = 1'-0" 3/4" = 1'-0" 1/4" = 1'-0" 1" = 100' 1/8" = 1'-0" ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Lines of an isometric drawing that are not parallel to the isometric axes are called this: Multiview lines Non-isometric lines Dimetric lines Trimetric lines Multiview lines Non-isometric lines Dimetric lines Trimetric lines ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility. Process piping Architectural Civil Electrical Process piping Architectural Civil Electrical ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________. Type 3 forward slash and enter Type 3 and try to use the Dynamic Input readout to find the end point Type @3 Type 3 back slash and enter Type 3 forward slash and enter Type 3 and try to use the Dynamic Input readout to find the end point Type @3 Type 3 back slash and enter ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Angles project true size only when the plane containing the angle and plane of projection are this: Parallel Aligned Perpendicular Adjacent Parallel Aligned Perpendicular Adjacent ANSWER DOWNLOAD EXAMIANS APP