Workshop Technology In arc welding, the temperature of heat produced by the electric arc is of the order of 4000°C to 5000°C 5000°C to 6000°C 6000°C to 7000°C 3000°C to 4000°C 4000°C to 5000°C 5000°C to 6000°C 6000°C to 7000°C 3000°C to 4000°C ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Swab is used for Moistening the sand around the edge before removing pattern Smoothing and cleaning out depressions in the mould Cleaning the moulding sand Reinforcement of sand in the top part of the moulding box Moistening the sand around the edge before removing pattern Smoothing and cleaning out depressions in the mould Cleaning the moulding sand Reinforcement of sand in the top part of the moulding box ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a unilateral system of tolerance, the tolerance is allowed on Both sides of the actual size One side of the actual size Both sides of the nominal size One side of the nominal size Both sides of the actual size One side of the actual size Both sides of the nominal size One side of the nominal size ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The teeth of hacksaw blade are bent Towards left May be bent in any direction Alternately towards right and left and every third or fourth left straight Towards right Towards left May be bent in any direction Alternately towards right and left and every third or fourth left straight Towards right ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In order to deliver molten metal from pouring basin to gate, a ________ is used. Riser None of these Sprue Core Riser None of these Sprue Core ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The advantage of Thermit welding is that All of these Results in a minimum problem with internal residual stresses All parts of the weld section are molten at the same time Weld cools almost uniformly All of these Results in a minimum problem with internal residual stresses All parts of the weld section are molten at the same time Weld cools almost uniformly ANSWER DOWNLOAD EXAMIANS APP