Measurement and Instrumentation In AC circuits, the connection of measuring instruments cause loading effect errors which may effect both of above. only phase of the quantity being measured. only the magnitude of the quantity being measured. magnitude, phase and waveform of the quantity being measured. both of above. only phase of the quantity being measured. only the magnitude of the quantity being measured. magnitude, phase and waveform of the quantity being measured. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When a potentiometer is used for measurement of voltage of an unknown source, the power consumed in the circuit of the unknown source under null condition is ideally zero. high. very high. small. ideally zero. high. very high. small. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A variable w is related to three other variables x, y and z as w = xy/z. The variables are measured with meters of accuracy ± 0.5% reading, ± 1% of full scale value and ± 1.5% reading. The actual readings of the three meters are 80, 20 and 50 with 100 being the full scale value for all three. The maximum uncertainty in the measurement of w will be ± 8% ± 7% ± 5% ± 6% ± 8% ± 7% ± 5% ± 6% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In DC potentiometer measurments, a second reading is often taken after reversing the polarities of the DC supply and the unknown voltage and the average of the two reading is taken. This is with a view of eliminate the effects of Errorneous standardisation. Ripples of the DC supply. Stray magnetic fields. Stray thermal emfs. Errorneous standardisation. Ripples of the DC supply. Stray magnetic fields. Stray thermal emfs. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The terminals across the source are ______________________________ if a current source is to be neglected. short circuited replaced by a capacitor open circuited replaced by a source resistance short circuited replaced by a capacitor open circuited replaced by a source resistance ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The circuit in figure is used to measure the power consumed by the load. The current coil and the voltage coil of the wattmeter have 0.02 Ω and 1000 Ω resistance respectively. The measured power compared to the load power will be 0.4% less. 0.4 more. 0.2% less. 0.2% more. 0.4% less. 0.4 more. 0.2% less. 0.2% more. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS