Theory of Machine In a system subjected to damped forced vibrations, the ratio of maximum displacement to the static deflection is known as Critical damping ratio Damping factor Logarithmic decrement Magnification factor Critical damping ratio Damping factor Logarithmic decrement Magnification factor ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The natural frequency of free transverse vibrations due to a point load acting over a simply supported shaft is equal to (where δ = Static deflection of a simply supported shaft due to the point load) 0.5615/√δ 0.4985/√δ 0.6253/√δ 0.571/√δ 0.5615/√δ 0.4985/√δ 0.6253/√δ 0.571/√δ ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine For an isochronous Hartnell governor (where r₁ and r₂ = Maximum and minimum radius of rotation of balls respectively, S₁ and S₂ = Maximum and minimum force exerted on the sleeve respectively, and M = Mass on the sleeve) (m.g + S₁)/(m.g + S₂) = r₁/r₂ S₁/S₂ = r₁/r₂ S₂/S₁ = r₁/r₂ (m.g - S₁)/(m.g - S₂) = r₂/r₁ (m.g + S₁)/(m.g + S₂) = r₁/r₂ S₁/S₂ = r₁/r₂ S₂/S₁ = r₁/r₂ (m.g - S₁)/(m.g - S₂) = r₂/r₁ ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The size of cam depends upon Prime circle Base circle Pitch circle Pitch curve Prime circle Base circle Pitch circle Pitch curve ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The motion of a shaft in a circular hole is an example of Successfully constrained motion None of these Completely constrained motion Incompletely constrained motion Successfully constrained motion None of these Completely constrained motion Incompletely constrained motion ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The Kutzbach criterion for determining the number of degrees of freedom (n) is (where l = number of links, j = number of joints and h = number of higher pairs) n = 2(l - 1) - 3j - h n = 2(l - 1) - 2j - h n = 3(l - 1) - 3j - h n = 3(l - 1) - 2j - h n = 2(l - 1) - 3j - h n = 2(l - 1) - 2j - h n = 3(l - 1) - 3j - h n = 3(l - 1) - 2j - h ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS