Measurement and Instrumentation In a single phase energy meter, braking torque is provided by Fluid friction None of the listed here Air friction Permanent magnet Fluid friction None of the listed here Air friction Permanent magnet ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation 0-150 V voltmeter has an accuracy of 1% of full-scale reading. The voltage measured by the instrument is 75 V. The limiting error is 2% 1% 3% 4% 2% 1% 3% 4% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation It is found that 10A current passes through a resistor of 10°hms. The resistor has 5% tolerance . The error in measurement of current can be as high as 5%. What is max error in measurement of power, calculated from measured value of I and the nominal value of resistor? 150W 200W 50W 100W 150W 200W 50W 100W ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The material of the shunt should have _______ temperature co-efficient of resistance. Negative Positive None of the listed here Negligible Negative Positive None of the listed here Negligible ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 10 mA. 100 mA. 1mA. 0.5 mA. 10 mA. 100 mA. 1mA. 0.5 mA. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A permanent magnet moving coil ammeter is connected in 50 Hz a. c. Circuit in which 5A current is flowing. The meter will read 0 A None of the listed here 5 A 2.5 A 0 A None of the listed here 5 A 2.5 A ANSWER DOWNLOAD EXAMIANS APP