Analog Electronics In a JFET, the primary control on drain electric current is exerted by voltage drop across channel. channel resistance. gate reverse bias. size of depletion regions. voltage drop across channel. channel resistance. gate reverse bias. size of depletion regions. ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed 39.5mV 79.5 mV 395mV 795mV 39.5mV 79.5 mV 395mV 795mV ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics In MOSFET devices the N-channel type is better the P-channel type in the following respects it is TTL compatible. it has better drive capability. it is faster. it has better noise immunity. it is TTL compatible. it has better drive capability. it is faster. it has better noise immunity. ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics To prevent a DC return between source and load, it is necessary to use Inductor between source and load Either A or B Capacitor between source and load Resistor between source and load Inductor between source and load Either A or B Capacitor between source and load Resistor between source and load ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics In a loaded zener regulator, which is the largest current? None of these Zener current. Load current. Series current. None of these Zener current. Load current. Series current. ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics In a properly biased NPN transistor most of the electrons from the emitter are stopped by the junction barrier. recombine in the emitter its self. pass through the base to the collector. recombine with holes in the base . are stopped by the junction barrier. recombine in the emitter its self. pass through the base to the collector. recombine with holes in the base . ANSWER DOWNLOAD EXAMIANS APP