Mass Transfer Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. Packed tower Sieve tray column Agitated vessel Bubble cap column Packed tower Sieve tray column Agitated vessel Bubble cap column ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is Induced draft cooling tower Natural draft cooling tower None of these Spray chamber Induced draft cooling tower Natural draft cooling tower None of these Spray chamber ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Heat load in a cooling tower Means the amount of heat thrown away (KCal/hr.) by the cooling tower Both A & B Is equal to the number of kg, of water circulated times the cooling range Neither A nor B Means the amount of heat thrown away (KCal/hr.) by the cooling tower Both A & B Is equal to the number of kg, of water circulated times the cooling range Neither A nor B ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer When the psychometric ratio is __________ then the adiabatic saturation temperature and wet bulb temperature becomes equal. ? > 1 < 1 1 ? > 1 < 1 1 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In a counter-current extractor, as the axial mixing increases, the extraction efficiency Depends on the pressure of the system Decreases Remains unchanged Increases Depends on the pressure of the system Decreases Remains unchanged Increases ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer A 25 cm x 25 cm x 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m x 1m x 1cm flat sheet of the same material is to be dried from one side only.Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is 2000 1500 2500 1000 2000 1500 2500 1000 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS