Manufacturing And Production Technology Hot rolling of mild steel is carried out Above recrystallization temperature Between recrystallization temperature At recrystallization temperature Between 100⁰C to 150⁰C Above recrystallization temperature Between recrystallization temperature At recrystallization temperature Between 100⁰C to 150⁰C ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In an interchangeable assembly, shafts of size 25.000 -0.0100⁺⁰∙⁰⁴⁰ mm mate with holes of size 25.000 -0.010⁺⁰∙⁰²⁰ mm. The maximum possible clearance in the assembly will be 10 microns 60 microns 20 microns 30 microns 10 microns 60 microns 20 microns 30 microns ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In which of the following milling machine, the table can be tilted in a vertical plane by providing a swivel arrangement at the knee? Universal milling machine Universal milling machine Hand milling machine Plain milling machine Universal milling machine Universal milling machine Hand milling machine Plain milling machine ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Which of the following statement is incorrect with reference of lathe cutting tools? The flank of the tool is the surface or surfaces below and adjacent to the cutting edges The heel is that part of the tool which is shaped to produce the cutting edges and face The base is that surface of the shank which bears against the support and takes tangent pressure of the cut The nose is the corner, arc or chamfer joining the side cutting and the end cutting edges The flank of the tool is the surface or surfaces below and adjacent to the cutting edges The heel is that part of the tool which is shaped to produce the cutting edges and face The base is that surface of the shank which bears against the support and takes tangent pressure of the cut The nose is the corner, arc or chamfer joining the side cutting and the end cutting edges ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The ductile materials, during machining, produce Discontinuous chips Continuous chips with built up edge Continuous chips Either (A) or (C) Discontinuous chips Continuous chips with built up edge Continuous chips Either (A) or (C) ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In determining the various forces on the chip, Merchant assumed that the Cutting edge of the tool is sharp and it does not make any flank contact with the workpiece Cutting velocity remains constant Only continuous chip without built-up-edge is produced All of these Cutting edge of the tool is sharp and it does not make any flank contact with the workpiece Cutting velocity remains constant Only continuous chip without built-up-edge is produced All of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS