Microprocessor HLT opcode means load accumulator with contents of register. end of program. load data to accumulator. store result in memory. load accumulator with contents of register. end of program. load data to accumulator. store result in memory. ANSWER DOWNLOAD EXAMIANS APP
Microprocessor The multiplexing of address bus and data buses is used in depends on the internal architecture. all the microprocessors. never multiplexed. none of these. depends on the internal architecture. all the microprocessors. never multiplexed. none of these. ANSWER DOWNLOAD EXAMIANS APP
Microprocessor Using DeMorgan’s Theorem we can convert any AND-OR structure into NOR-NAND NAND-NAND OR-NAND NAND-NOR NOR-NAND NAND-NAND OR-NAND NAND-NOR ANSWER DOWNLOAD EXAMIANS APP
Microprocessor The length of bus cycle in 8086/8088 is four clock cycles, T1, T2, T3, T4 and an indeterminate number of wait state clock cycles denoted by Tw. The wait states are always inserted between T1 & T2 T3 & T4 T4 & T1 T2 & T3 T1 & T2 T3 & T4 T4 & T1 T2 & T3 ANSWER DOWNLOAD EXAMIANS APP
Microprocessor In a vector interrupt the branch address is assigned to a fixed location in memory. the interrupting source supplies the branch information to the processor through an interrupt vector. the branch address is obtained from a register in the processor. none. the branch address is assigned to a fixed location in memory. the interrupting source supplies the branch information to the processor through an interrupt vector. the branch address is obtained from a register in the processor. none. ANSWER DOWNLOAD EXAMIANS APP
Microprocessor I)A total of about one million bytes can be directly addressed by the 8086 microprocessor II)8086 has thirteen 16-bit registers III)8086 has eight flags IV)Compared to 8086, the 80286 provides a higher degree of memory protection Which one of the statements given above are correct? 2,3&4 1,2 & 3 1,3 &4 1,2 & 4 2,3&4 1,2 & 3 1,3 &4 1,2 & 4 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS