Electrical Machines For same HP rating and full load speed which of following motor has poor starting torque? Cummulative compound. Series. Shunt. Differently compounded. Cummulative compound. Series. Shunt. Differently compounded. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines For a DC machine having P no of pair of pole pairs, Z no of conductors having length L of resistivity ρ and cross section S are arranged. what is the armature resistance? PZL/ 4Sa PZL/4Sp² PZL/4S PZL/4Sa² PZL/ 4Sa PZL/4Sp² PZL/4S PZL/4Sa² ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A smaller air gap in a polyphase induction motor helps to increase the starting torque. reduce the chance of crawling. reduce the chance of cogging. reduce the magnetizing current. increase the starting torque. reduce the chance of crawling. reduce the chance of cogging. reduce the magnetizing current. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The external resistance to be added in the armature circuit to limit the armature current to 125% of its rated value is 31.9 Ω 15.9 Ω 15.1 Ω 31.1 Ω 31.9 Ω 15.9 Ω 15.1 Ω 31.1 Ω ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 3-φ alternator has negligible stator resistance. A short circuit test is conducted on this alternator. At a particular speed, a field current of If1 is required to drive the rated armature current. If the speed of the alternator is reduced to half, the field current required to maintain rated armature current Woud be equal to 2If1. Would be equal to If1/2. Would be equal to If1. Cannot be predicted due to insufficient data. Woud be equal to 2If1. Would be equal to If1/2. Would be equal to If1. Cannot be predicted due to insufficient data. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The air gap between the yoke and armature is dc machine is kept very small to avoid over heating. to achieve a stronger magnetic field. to avoid locking of the armature. All of these to avoid over heating. to achieve a stronger magnetic field. to avoid locking of the armature. All of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS