Measurement and Instrumentation For measurement of mutual inductance we can use Heavyside bridge Anderson bridge Maxwell's bridge Any of the listed here Heavyside bridge Anderson bridge Maxwell's bridge Any of the listed here ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For a circuit given that I = 2 ± 5 % A, R = 100 ± 0.2 % Ω the limiting error in the power dissipation I2 R in the resistor R is 25.2% 1.2% 5.2% 10.2% 25.2% 1.2% 5.2% 10.2% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation To measure high frequency currents, we mostly use ______ ammeter. Dynamometer Thermocouple Moving iron Hot wire Dynamometer Thermocouple Moving iron Hot wire ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation How many fundamental units are there ? 4 8 7 6 4 8 7 6 ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A single phase load is connected between R and Y terminals of a 415 V, symmetrical, 3-phase, 4 wire system with phase sequence RYB. A wattmeter is connected in the system as shown in figure. The power factor of the load is 0.8 lagging. The wattmeter will read - 795 W. + 795 W. - 597 W. + 597 W. - 795 W. + 795 W. - 597 W. + 597 W. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving coil of a meter has 100 turns, and a length and depth of 10 mm and 20 mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carries a current of 50 mA. The torque on the coil is 2 µNm. 1 µNm. 200 µNm. 100 µNm. 2 µNm. 1 µNm. 200 µNm. 100 µNm. ANSWER DOWNLOAD EXAMIANS APP