Power Systems Find the propagation constant, if impedance is 10Ω and admittance is 10 ℧? 10 5 100 1 10 5 100 1 ANSWER DOWNLOAD EXAMIANS APP
Power Systems A transmission line has surge impedance of 400 Ω, operating at Vs = Vr = 400 kV line is compensated with a shunt capacitance of 30%. The line is connected to a generator delivering 200 MW. Find the load angle with out and with compensation respectively? 26° and 30° 30° and 26° 30° and 45° 45° and 26° 26° and 30° 30° and 26° 30° and 45° 45° and 26° ANSWER DOWNLOAD EXAMIANS APP
Power Systems The Gauss Seidel load flow method has following disadvantages. Which of the following statement is wrong? A good initial guess for voltages is essential for convergence Unreliable convergence Choice of slack bus affects the convergence Slow convergence A good initial guess for voltages is essential for convergence Unreliable convergence Choice of slack bus affects the convergence Slow convergence ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power system consists of 300 buses out of which 20 buses are generator buses, 25 buses are the ones with reactive power support buses and 15 buses are ones with fixed shunt capacitors. All the other buses are load buses. It is proposed to perform a load flow analysis for the system using Newton-Raphson Jacobian matrix is 554×554 553×553 555×555 540×540 554×554 553×553 555×555 540×540 ANSWER DOWNLOAD EXAMIANS APP
Power Systems What will be the ratio of the C.T. on the H.V side of a 3 - φ star / delta 33 / 11 kV transformer if the protecting CT on the LV side has a ratio of 300 : 5 ? 100 : 5 / √3. 120 : 6 / √3. 150 : 4 / √3. 200 : 5 / √3. 100 : 5 / √3. 120 : 6 / √3. 150 : 4 / √3. 200 : 5 / √3. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The incremental fuel costs for two generating units G1 and G2 are given by Ic1 = 25 + 0.2 PG1 and Ic2 = 32 + 0.2 PG2, where PG1 and PG2 are real powers generated by the units. The economic allocation for a total load of 250 MW, neglecting transmission loss, is given by PG1 = 100 MW and PG2 = 150 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS