Microprocessor Consider the following registers: 1. Accumulator and flag register 2. B and C register 3. D and E register 4. H and L register Which of these 8-bit registers of 8085 microprocessor can be paired together to make a 16-bit register? 1, 2 and 3 1, 2 and 4 2, 3 and 4 1, 3 and 4 1, 2 and 3 1, 2 and 4 2, 3 and 4 1, 3 and 4 ANSWER DOWNLOAD EXAMIANS APP
Microprocessor The 8085 microprocessor enters into bus idle machine cycle whenever None of these DAD RP instruction is executed RST 7.5 is recognized INTR interrupt is recognized None of these DAD RP instruction is executed RST 7.5 is recognized INTR interrupt is recognized ANSWER DOWNLOAD EXAMIANS APP
Microprocessor The characteristics of RESET OUT signal is/are this signal can be used to reset other devices. the signal is synchronized to the processor clock. all. indicates that µp is being reset. this signal can be used to reset other devices. the signal is synchronized to the processor clock. all. indicates that µp is being reset. ANSWER DOWNLOAD EXAMIANS APP
Microprocessor A number of 1-bit registers used in microprocessors to indicate certain conditions are usually referred to as shift registers latches flags counters shift registers latches flags counters ANSWER DOWNLOAD EXAMIANS APP
Microprocessor The reason for the presence of ALE pin in 8085, but not in 6800 is that None 8085 has 5 interrupts lines, whereas 6800 has only two 8085 uses I/O mapped I/O, whereas 6800 uses memory mapped I/O 8085 has multiplexed bus, whereas 6800 does not have None 8085 has 5 interrupts lines, whereas 6800 has only two 8085 uses I/O mapped I/O, whereas 6800 uses memory mapped I/O 8085 has multiplexed bus, whereas 6800 does not have ANSWER DOWNLOAD EXAMIANS APP
Microprocessor The number of hardware interrupts present in 8085 microprocessor are 8 5 16 10 8 5 16 10 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS