Manufacturing And Production Technology Carbide tipped tools usually have Negative rake angle No rake angle Positive rake angle Any rake angle Negative rake angle No rake angle Positive rake angle Any rake angle ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In lapping operation, the amount of metal removed is 0.01 to 0.1 mm 0.005 to 0.01 mm 0.05 to 0.1 mm 0.5 to 1 mm 0.01 to 0.1 mm 0.005 to 0.01 mm 0.05 to 0.1 mm 0.5 to 1 mm ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In a milling operation, two side milling cutters are mounted with a desired distance between them so that both sides of a workpiece can be milled simultaneously. This set up is called Straddle milling Gang milling Side milling String milling Straddle milling Gang milling Side milling String milling ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Two 1 mm thick steel sheets are to be spot welded at a current of 5000 A. Assuming effective resistance to be 200 μm and current flow time of 0.2 second, heat generated during the process will be 5 Joule 1000 Joule 1 Joule 0.2 Joule 5 Joule 1000 Joule 1 Joule 0.2 Joule ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Two streams of liquid metal which are not hot enough to fuse properly result into a casting defect known as Cold shut Sand wash Scab Swell Cold shut Sand wash Scab Swell ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The chuck preferred for quick setting and accurate centering of a job is Three jaw universal chuck Four jaw independent chuck Magnetic chuck Collect chuck Three jaw universal chuck Four jaw independent chuck Magnetic chuck Collect chuck ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS