Measurement and Instrumentation An oscilloscope indicates Peak to peak value of voltage Average value DC value of voltage RMS value Peak to peak value of voltage Average value DC value of voltage RMS value ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The total current I = I1 + I2 in a circuit is measured as I1 = 150 ± 1A , I2 = 250 ± 2A, where the limits of error are as standard deviations. I is measured as (400 ± 3) A (400 ± 1) A (400 ± 2.24) A (400 ± 1.5) A (400 ± 3) A (400 ± 1) A (400 ± 2.24) A (400 ± 1.5) A ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The quantity 1/√(∈0 × μ0) in SI units has the both ‘a’ and ‘b’. dimension LT-1. speed of light. none of these. both ‘a’ and ‘b’. dimension LT-1. speed of light. none of these. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A pressure measurement instrument is calibrated between 10 bar and 260 bar. The scale span of the instrument is 260 bar. 10 bar. 270 bar. 250 bar. 260 bar. 10 bar. 270 bar. 250 bar. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 10 mA. 100 mA. 0.5 mA. 1mA. 10 mA. 100 mA. 0.5 mA. 1mA. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving coil of a meter has 100 turns, and a length and depth of 10 mm and 20 mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carries a current of 50 mA. The torque on the coil is 2 µNm. 100 µNm. 1 µNm. 200 µNm. 2 µNm. 100 µNm. 1 µNm. 200 µNm. ANSWER DOWNLOAD EXAMIANS APP