An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed

Analog Electronics
An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed

395mV

79.5 mV

39.5mV

795mV

395mV

79.5 mV

39.5mV

795mV

ANSWER DOWNLOAD EXAMIANS APP

Analog Electronics
Leakage electric current in CE configuration is

not present.

normal.

very high.

very small.

not present.

normal.

very high.

very small.

ANSWER DOWNLOAD EXAMIANS APP

Analog Electronics
Acceptor type impurities

Create excess holes

All of these

are used to make P-type semiconductor

have three valance electrons

Create excess holes

All of these

are used to make P-type semiconductor

have three valance electrons

ANSWER DOWNLOAD EXAMIANS APP

Analog Electronics
Which process is used for adding impurity into a pure semiconductor material ?

Conducting

Doping

Insulating

None of these

Conducting

Doping

Insulating

None of these

ANSWER DOWNLOAD EXAMIANS APP

Analog Electronics
The base of an npn transistor is thin and

doped by a pentavalent material.

lightly doped.

metallic.

heavily doped.

doped by a pentavalent material.

lightly doped.

metallic.

heavily doped.

ANSWER DOWNLOAD EXAMIANS APP

Analog Electronics
For a diode, reverse recovery time is defined as the time between the instant diode current becomes zero and the instant reverse recovery current decays to

0.

15% of reverse peak current.

10% of reverse peak current.

25% of reverse peak current.

0.

15% of reverse peak current.

10% of reverse peak current.

25% of reverse peak current.

ANSWER DOWNLOAD EXAMIANS APP

Analog Electronics

Analog Electronics An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed

Analog Electronics Leakage electric current in CE configuration is

Analog Electronics Acceptor type impurities

Analog Electronics Which process is used for adding impurity into a pure semiconductor material ?

Analog Electronics The base of an npn transistor is thin and

Analog Electronics For a diode, reverse recovery time is defined as the time between the instant diode current becomes zero and the instant reverse recovery current decays to

Analog Electronics
An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed

Analog Electronics
Leakage electric current in CE configuration is

Analog Electronics
Acceptor type impurities

Analog Electronics
Which process is used for adding impurity into a pure semiconductor material ?

Analog Electronics
The base of an npn transistor is thin and

Analog Electronics
For a diode, reverse recovery time is defined as the time between the instant diode current becomes zero and the instant reverse recovery current decays to