Mass Transfer Absorption factor, for a fixed degree of absorption from a fixed amount of gas should be 1 ≤ 1 > 1 < 1 1 ≤ 1 > 1 < 1 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer When the solvent dissolves very little of solute, then Solvent of low freezing point should be used Large quantity of solvent is required to extract the solute Solvent of low latent heat of vaporisation should be used Very small quantity of solvent is required Solvent of low freezing point should be used Large quantity of solvent is required to extract the solute Solvent of low latent heat of vaporisation should be used Very small quantity of solvent is required ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. Neither A nor B Is one at unity value of Increases with increase in Both A and B Neither A nor B Is one at unity value of Increases with increase in Both A and B ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The cooling effect in a cooling tower can be speeded up by All of the listed here Increasing the air velocity and area of exposed wet surface Reducing the barometric pressure Reducing the humidity of the air All of the listed here Increasing the air velocity and area of exposed wet surface Reducing the barometric pressure Reducing the humidity of the air ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer As the reflux ratio in a distillation coloumn is increased from the minimum, the Total cost first decreases and then increases Liquid flow increases while the vapor flow decreases for a system Number of plates decreases very slowly first and then more and more rapidly Slope of the operating line in stripping section decreases Total cost first decreases and then increases Liquid flow increases while the vapor flow decreases for a system Number of plates decreases very slowly first and then more and more rapidly Slope of the operating line in stripping section decreases ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m² and the solvent flow, rate is 400 moles of S/m². hr. The equilibrium data is represented by Y = 3X² , where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is 0.7 0.9 0.25 0.5 0.7 0.9 0.25 0.5 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS