Workshop Technology A taper provided on the pattern for its easy and clean withdrawal from the mould is known as Draft allowance Machining allowance Distortion allowance Shrinkage allowance Draft allowance Machining allowance Distortion allowance Shrinkage allowance ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Loam sand is a mixture of 50% sand and 50% clay 90% sand and 10% clay 30% sand and 70% clay 70% sand and 30% clay 50% sand and 50% clay 90% sand and 10% clay 30% sand and 70% clay 70% sand and 30% clay ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In welding magnesium with TIG arc welding, direct current with ________ is used. None of these Reversed polarity Straight polarity Both (A) and (B) None of these Reversed polarity Straight polarity Both (A) and (B) ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The fullers are used To finish the punched hole For punching a hole For finishing flat surfaces For necking down a piece of work To finish the punched hole For punching a hole For finishing flat surfaces For necking down a piece of work ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Linde welding uses Neutral flame and leftward technique Oxidizing flame and leftward technique Carburising flame and rightward technique Neutral flame and rightward technique Neutral flame and leftward technique Oxidizing flame and leftward technique Carburising flame and rightward technique Neutral flame and rightward technique ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For gas welding, the pressure desired at the welding torch for oxygen is 560 to 840 kN/m² 70 to 280 kN/m² 280 to 560 kN/m² 7 to 103 kN/m² 560 to 840 kN/m² 70 to 280 kN/m² 280 to 560 kN/m² 7 to 103 kN/m² ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS