Measurement and Instrumentation A multirange instrument has Multicoil arrangement Variable turns of coil Multirange meters inside the measurement system Multiple shunt or series resistance inside the meter Multicoil arrangement Variable turns of coil Multirange meters inside the measurement system Multiple shunt or series resistance inside the meter ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Why is a MISC meter not recommended for DC measurement? The error is high due to hysteresis effect The meter does not respond to DC signals The meter is calibrated for AC and it’s error for DC would be high The error is high due to eddy current effect The error is high due to hysteresis effect The meter does not respond to DC signals The meter is calibrated for AC and it’s error for DC would be high The error is high due to eddy current effect ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving coil of a meter has 100 turns, and a length and depth of 10 mm and 20 mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carries a current of 50 mA. The torque on the coil is 100 µNm. 200 µNm. 2 µNm. 1 µNm. 100 µNm. 200 µNm. 2 µNm. 1 µNm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Assertion (A) : It is always desirable to take the reading of an indicating instrument very close to the full scale reading. Reason (R) : Accuracy of an indicating instrument is maximum at the full scale deflection and error increases as reading comes closer to the beginning of the scale. A is false bur R is true A is true but R is false Both A and R are true but R is NOT the correct explanation of A Both A and R are true and R is the correct explanation of A A is false bur R is true A is true but R is false Both A and R are true but R is NOT the correct explanation of A Both A and R are true and R is the correct explanation of A ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Induction wattmeter can measure Dc power only Both AC and DC Ac power only None of the listed here Dc power only Both AC and DC Ac power only None of the listed here ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A CRO probe has an impedance of 500 kΩ in parallel with a capacitance of 10 pF. The probe is used to measure the voltage between P and Q as shown in figure. The measured voltage will be 3.53 V. 5 V. 4.38 V. 4.54 V. 3.53 V. 5 V. 4.38 V. 4.54 V. ANSWER DOWNLOAD EXAMIANS APP