Computer Networking A default Frame Relay WAN is classified as what type of physical network? Point-to-point Non-broadcast multipoint Non-broadcast multi-access Broadcast multi-access Point-to-point Non-broadcast multipoint Non-broadcast multi-access Broadcast multi-access ANSWER DOWNLOAD EXAMIANS APP
Computer Networking The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corporate router, what will the router do with this packet?Corp#sh ip route[output cut]R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0C 192.168.20.0 is directly connected, Serial0/0C 192.168.214.0 is directly connected, FastEthernet0/0 The packet will be routed out the S0/0 interface. The packet will be routed out the Fa0/0 interface. The packet will be discarded. The router will broadcast looking for the destination. They will all load-balance. The packet will be routed out the S0/0 interface. The packet will be routed out the Fa0/0 interface. The packet will be discarded. The router will broadcast looking for the destination. They will all load-balance. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Using the illustration from the previous question, what would be the IP address of SO if you were using the first subnet? The network ID is 192.168.10.0/28 and you need to use the last available IP address in the range. Again, the zero subnet should not be considered valid for this question. 192.168.10.127 192.168.10.30 192.168.10.62 192.168.10.24 192.168.10.127 192.168.10.30 192.168.10.62 192.168.10.24 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which of the following are layers in the TCP/IP model?1. Application2. Session3. Transport4. Internet5. Data Link6. Physical 3, 4 and 5 1 and 2 1, 3 and 4 2, 3 and 5 3, 4 and 5 1 and 2 1, 3 and 4 2, 3 and 5 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which are considered the methods of NAT?1. Static2. IP NAT pool3. Dynamic4. NAT double-translation5. Overload 3 only 1, 3 and 5 1 and 6 All of these 3 only 1, 3 and 5 1 and 6 All of these ANSWER DOWNLOAD EXAMIANS APP
Computer Networking A modem that is attached to the telephone system by jamming the phone's handset into two flexible receptacles in the coupler? bridge acoustic coupler time-division multiplexer gateway None of these bridge acoustic coupler time-division multiplexer gateway None of these ANSWER DOWNLOAD EXAMIANS APP