Analog Electronics A dc power supply has no-load voltage of 30v,and a full-load voltage of 25v at full-load current of 1A.Its output resistance & load regulation ,respectively are 5 Ω & 16.7 % 25 Ω & 20 % 25 Ω & 16.7 % 5 Ω & 20 % 5 Ω & 16.7 % 25 Ω & 20 % 25 Ω & 16.7 % 5 Ω & 20 % ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics Generally, the gain of a transistor amplifier falls at high frequencies due to the Internal Capacitance of the device Coupling capacitor at the output Skin effect Coupling capacitor at the input Internal Capacitance of the device Coupling capacitor at the output Skin effect Coupling capacitor at the input ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics The main job of a voltage regulator is to provide a nearly __________________ output voltage. fluctuating. smooth. constant. sinusoidal. fluctuating. smooth. constant. sinusoidal. ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics Thermal runaway is not possible in FET because as the temperature of FET increases The drain current increases None of these The mobility decreases The transconductance increases The drain current increases None of these The mobility decreases The transconductance increases ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics Which of the following oscillators are used for low frequency (LF) applications None Both LC and RC Oscillators RC oscillators LC oscillators None Both LC and RC Oscillators RC oscillators LC oscillators ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics If the current gain is 100 and the collector current is 10 mA, the base current is 10 µA. 10 A. 100 µA. 1 A. 10 µA. 10 A. 100 µA. 1 A. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS