Manufacturing And Production Technology A better machinable metal is one which gives Lower chip-tool contact area and smaller shear angle Higher chip-tool contact area and larger shear angle Lower chip-tool contact area and larger shear angle Higher chip-tool contact area and smaller shear angle Lower chip-tool contact area and smaller shear angle Higher chip-tool contact area and larger shear angle Lower chip-tool contact area and larger shear angle Higher chip-tool contact area and smaller shear angle ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In an interchangeable assembly, shafts of size 25.000 -0.0100⁺⁰∙⁰⁴⁰ mm mate with holes of size 25.000 -0.010⁺⁰∙⁰²⁰ mm. The maximum possible clearance in the assembly will be 60 microns 10 microns 30 microns 20 microns 60 microns 10 microns 30 microns 20 microns ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The cutting force in punching and blanking operations mainly depends on The modulus of elasticity of metal The shear strength of metal The yield strength of metal The bulk modulus of metal The modulus of elasticity of metal The shear strength of metal The yield strength of metal The bulk modulus of metal ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Friction at the tool-chip interface can be reduced by Decreasing the cutting speed Decreasing the rake angle Increasing the depth of cut Increasing the cutting speed Decreasing the cutting speed Decreasing the rake angle Increasing the depth of cut Increasing the cutting speed ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The usual value of the point angle of a drill is 130° 118° 70° 100° 130° 118° 70° 100° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In electrochemical machining, the gap between the tool and work is kept as 0.4 mm 0.75 mm 0.35 mm 0.1 mm 0.4 mm 0.75 mm 0.35 mm 0.1 mm ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS