Power Systems A 3-phase transmission line has its conductors at the corners of an equilateral triangle with side 3m. The diameter of each conductor is 1.63 cm. The inductance of the line per phase per km is 1.182 mH 1.043 mH 1.093 mH 1.232 mH 1.182 mH 1.043 mH 1.093 mH 1.232 mH ANSWER DOWNLOAD EXAMIANS APP
Power Systems In what from the initial energy will be released for the 200 MeV per fission by a neutron in a slow thermal nuclear reactor heat energy. kinetic energy of particles and electromagnetic radiation. electromagnetic radiations. kinetic energy and sound energy. heat energy. kinetic energy of particles and electromagnetic radiation. electromagnetic radiations. kinetic energy and sound energy. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The essential requirement(s) for power plants to be operated as peak load plants are Low capital cost. Capability of quick starts. All of these Quick response to load variation. Low capital cost. Capability of quick starts. All of these Quick response to load variation. ANSWER DOWNLOAD EXAMIANS APP
Power Systems An unloaded generator with a pre-fault voltage 1 pu has the following sequence impedance: Z0 = j 0.15 pu, Z1 = Z2 = j 0.25 pu The neutral is grounded with a reactance of 0.05 pu. The fault current in pu for single line to ground fault is 4.28 pu 7.25 pu 2.5 pu 3.75 pu 4.28 pu 7.25 pu 2.5 pu 3.75 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems The incremental fuel costs for two generating units G1 and G2 are given by Ic1 = 25 + 0.2 PG1 and Ic2 = 32 + 0.2 PG2, where PG1 and PG2 are real powers generated by the units. The economic allocation for a total load of 250 MW, neglecting transmission loss, is given by PG1 = 100 MW and PG2 = 150 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems String chart is drawn between nether 1 nor 2 both 1 and 2 temperature (T) on X- axis, sag(S) and tension (T) on Y-axis T on Y-axis and S and T on on X-axis nether 1 nor 2 both 1 and 2 temperature (T) on X- axis, sag(S) and tension (T) on Y-axis T on Y-axis and S and T on on X-axis ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS