Windows NT
Your 10Base2 Ethernet cable is 185 meters long. You are planning to extend your network by adding another 100 meters of cable. The total length of the cable will be 285 meters. The network uses NetBEUI. Which device should you use?

router
gateway
repeater
None of these
T connecter

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

10
5
2
4
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to share the existing conduit with telephone cable, and cable segments will be up to 135 meters in length. Which cable is best suited to this installation?

Category 1 UTP
Thicknet Coaxial
Fiber Optic
Category 3 UTP
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
A company has a department that consists of 15 engineers. The engineers have data that needs to be accessible only to their own team. The department continually has engineers arriving and departing, and it is difficult to identify a single administrator for the department Which model would be the best for this situation?

A complete trust mode, with each engineer's computer trusting the other engineer's computers
A single domain mode, with all data kept on the controller for the domain
None of these
A master domain mode, with each engineer trusting the master domain and the data stored on the server
A workgroup mode, with each engineer administering his or her own computer

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
There are two domains on your network. The DESIGN domain trusts the SALES domain. A color printer is shared in the DESIGN domain, and print permissions have been granted to the Domain Users and Domain Guests groups in the DESIGN domain. The Guest account has been enabled in the DESIGN domain. User John Y logs on using his account in the SALES domain. What must you do to allow JohnY to access the printer?

Make JohnY a member of the DESIGN Domain Users group
JohnY cannot access the printer with this configuration
Do nothing. JohnY can access the printer now
None of these
Make JohnY a member of the DESIGN Domain Guests group

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are adding a new server to your network. The network uses TCP/IP. The new server will provide users with dial-up access to network resources. The data link communications protocol you choose for dial-up access must allow you to provide secure authentication. Which protocol should you choose?

In the System option in Control Panel, select the setting that allows users to log on locally
PPP
In the System option in Control Panel, set the user environment variables to allow Maria to log on locally
DLC
None of these

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows NT