Windows NT
You need to install network adapters in 20 ISA-bus computers. Which rule must you follow when installing the network adapters?

All adapters in a computer, including the network adapter, must be set to the same IRQ
All network adapters in all computers on the same network must be set to different IRQs
All network adapters in all computers on the same network must be set to the same IRQ
All adapters in a computer, including the network adapter, must be set to different IRQs
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?

5
2
10
4
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
Why does a high number of broadcast messages adversely affect overall network performance?

None of these
Each broadcast message requires an acknowledgement packet from every computer on the network
Every computer on the network must process each broadcast message
Broadcast messages are automatically routed to every segment of a LAN
No computer on the network can transmit data until each broadcast message has been acknowledged by every computer on the network

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
How do you configure a printing pool?

Associate multiple print devices with multiple printers
Associate multiple print devices with one printer
Associate one print device with multiple printers
Associate one physical print gear port with multiple printers
None of these

ANSWER DOWNLOAD EXAMIANS APP

Windows NT
In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?

malfunctioning repeater
None of these
defective network adapter in the router
incorrect subnet mask on your client computer
incorrect termination of the destination network

ANSWER DOWNLOAD EXAMIANS APP