Computer Networking With which network type will OSPF establish router adjacencies but not perform the DR/BDR election process? Non-broadcast multi-access Backbone area 0 Broadcast multi-access Point-to-point IS-IS Non-broadcast multi-access Backbone area 0 Broadcast multi-access Point-to-point IS-IS ANSWER DOWNLOAD EXAMIANS APP
Computer Networking How much power (roughly) a light-emitting diode can couple into an optical fiber? 100 microwatts 10 milliwatts 440 microwatts 100 picowatts None of these 100 microwatts 10 milliwatts 440 microwatts 100 picowatts None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Networking The probability that a single bit will be in error on a typical public telephone line using 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error rate for a communication line using 9-bit frames is approximately equal to None of these 0.003 0.991 0.999 0.009 None of these 0.003 0.991 0.999 0.009 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking The ________ measures the number of lost or garbled messages as a fraction of the total sent in the sampling period. Connection release failure probability. Transfer Failure Probability. Residual Error Rate. Connection establish. Connection release failure probability. Transfer Failure Probability. Residual Error Rate. Connection establish. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which of the following is true when describing a link-local address? Packets addressed to a unicast address are delivered to a single interface. These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4. These are like private addresses in IPv4 in that they are not meant to be routed. These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap. Packets addressed to a unicast address are delivered to a single interface. These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4. These are like private addresses in IPv4 in that they are not meant to be routed. These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which two of the following commands will place network 10.2.3.0/24 into area 0?1. router eigrp 102. router ospf 103. network 10.0.0.04. network 10.2.3.0 0.0.0.255 area05. network 10.2.3.0 0.0.0.255 area 0 3 and 4 2, 4, and 5 2 and 5 1 and 4 3 and 4 2, 4, and 5 2 and 5 1 and 4 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS