Electric Circuits While comparing magnetic field and electric circuits, the point of dissimilarity exists while considering reluctance and resistance. mmf and emf. permeance and conductance. flux and current flow. reluctance and resistance. mmf and emf. permeance and conductance. flux and current flow. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Which of the following theorems can be applied to any network- linear or nonlinear, active or passive, time variant or time invariant? Millman theorem. Tellegen theorem. Norton Theorem. Thevnin theorem. Millman theorem. Tellegen theorem. Norton Theorem. Thevnin theorem. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits The maximum current rating for a 10 k Ω, 0.5 W resistor is 7.07 mA. 0.707 mA. 14.14 mA. 28.28 mA. 7.07 mA. 0.707 mA. 14.14 mA. 28.28 mA. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Constant K type HPF (high pass filter) having cut off frequency 12 KHz and nominal impedance Ro = 500 Ω Find shunt arm inductor L and series arm capacitance C for T and π section of HPF ? L = 3.316 mH, C = 0.0132 μF. None of these. L = 3.316 mH, C = 132 μF. L = 0.0132 mH, C = 0.0132 μF. L = 3.316 mH, C = 0.0132 μF. None of these. L = 3.316 mH, C = 132 μF. L = 0.0132 mH, C = 0.0132 μF. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits A branch of a network is said to be passive when it contains voltmeter. current source. battery. voltage source. voltmeter. current source. battery. voltage source. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Emf induced in a coil rotating in a uniform magnetic field will be maximum when the rate of cutting flux by coil sides is minimum. flux linking with the coil is maximum. rate of change of flux linkage is minimum. rate of change of flux linkage is maximum. rate of cutting flux by coil sides is minimum. flux linking with the coil is maximum. rate of change of flux linkage is minimum. rate of change of flux linkage is maximum. ANSWER DOWNLOAD EXAMIANS APP