Computer Hardware
After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the:

None of these
Floppy drive ribbon cable
System's power supply
System's floppy drive device driver
Original IDE controller

ANSWER DOWNLOAD EXAMIANS APP

Computer Hardware
A brownout is defined as:

alternating power out, power on lasting a few minutes
has nothing to do with electricity
a slightly elevated voltage lasting from seconds to minutes or more
complete power out lasting a few minutes
a slightly decreased voltage lasting from seconds to minutes or more

ANSWER DOWNLOAD EXAMIANS APP

Computer Hardware
Suppose that you have a the maintenance package identifies several possible field replaceable units (FRUs) that will resolve the problem. What should you do after turning the power off?

Replace all of the indicated FRUs at once and return the machine to the customer if the problem is resolved
Follow the same procedure as in ays replace the system board first if it is on the list of possible FRUs If multiple FRUs are indicated, then software is the most likely source of the problem
None of these
Replace the indicated parts, one at a time in the recommended sequence, until the problem is resolved; return unused FRUs to stock

ANSWER DOWNLOAD EXAMIANS APP

Computer Hardware
What is the most likely cause of an "FDD controller Failure" error message?

None of these
you forgot to flash CMOS
you did not set the jumper on the floppy drive to drive A
you installed the floppy disk drive cable backward
your computer's floppy drive is defective

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Computer Hardware