Computer Hardware Which peripheral port provides the FASTEST throughput to laser printers? RS-232 Parallel SCSI None of these Serial RS-232 Parallel SCSI None of these Serial ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the: Floppy drive ribbon cable System's floppy drive device driver Original IDE controller None of these System's power supply Floppy drive ribbon cable System's floppy drive device driver Original IDE controller None of these System's power supply ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What product is used to clean smudged keys on a keyboard? Denatured alcohol All-purpose cleaner Silicone spray None of these TMC solvent Denatured alcohol All-purpose cleaner Silicone spray None of these TMC solvent ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What resistance in ohms should be displayed when testing a speaker in a computer? -200 Ohms Unlimited Ohms None of these 16 Ohms Q Ohms -200 Ohms Unlimited Ohms None of these 16 Ohms Q Ohms ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware In which phase of the laser printing process is a positive charge placed on the paper to pull the toner from the print drum? Transferring All of these Conditioning None of these Writing Transferring All of these Conditioning None of these Writing ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To install a second IDE drive into a computer, you must Use the IDE configuration software to set the new drive as slave Set the master-slave jumper to slave on the second drive Verify that you attach the drive to the connector at the end of the ribbon cable Verify that you define the new drive as D: in the CMOS setup Use the IDE configuration software to set the new drive as slave Set the master-slave jumper to slave on the second drive Verify that you attach the drive to the connector at the end of the ribbon cable Verify that you define the new drive as D: in the CMOS setup ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS