Computer Networking Which one of the following is true regarding VLANs? You should not have more than 10 switches in the same VTP domain. Two VLANs are configured by default on all Cisco switches. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed. VTP is used to send VLAN information to switches in a configured VTP domain. You should not have more than 10 switches in the same VTP domain. Two VLANs are configured by default on all Cisco switches. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed. VTP is used to send VLAN information to switches in a configured VTP domain. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You are connecting your access point and it is set to root. What does Extended Service Set ID mean? That you have multiple access points, but they are placed physically in different buildings. That you have multiple access points, but one is a repeater access point. That you have more than one access point and they are in separate SSIDs connected by a distribution system. That you have more than one access point and they are in the same SSID connected by a distribution system. That you have multiple access points, but they are placed physically in different buildings. That you have multiple access points, but one is a repeater access point. That you have more than one access point and they are in separate SSIDs connected by a distribution system. That you have more than one access point and they are in the same SSID connected by a distribution system. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You have a network with a subnet of 172.16.17.0/22. Which is the valid host address? 172.16.20.1 255.255.254.0 172.16.17.1 255.255.255.252 172.16.0.1 255.255.240.0 172.16.18.255 255.255.252.0 172.16.20.1 255.255.254.0 172.16.17.1 255.255.255.252 172.16.0.1 255.255.240.0 172.16.18.255 255.255.252.0 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Your company is running IGRP using an AS of 10. You want to configure EIGRP on the network but want to migrate slowly to EIGRP and don't want to configure redistribution. What command would allow you to migrate over time to EIGRP without configuring redistribution? router igrp combine eigrp 10 router eigrp 10 router eigrp 10 redistribute igrp router eigrp 11 router igrp combine eigrp 10 router eigrp 10 router eigrp 10 redistribute igrp router eigrp 11 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking When data is encapsulated, which is the correct order? Data, frame, packet, segment, bit Segment, data, packet, frame, bit Data, segment, frame, packet, bit Data, segment, packet, frame, bit Data, frame, packet, segment, bit Segment, data, packet, frame, bit Data, segment, frame, packet, bit Data, segment, packet, frame, bit ANSWER DOWNLOAD EXAMIANS APP
Computer Networking A network administrator is connecting hosts A and B directly through their Ethernet interfaces, as shown in the illustration. Ping attempts between the hosts are unsuccessful. What can be done to provide connectivity between the hosts?1. A crossover cable should be used in place of the straight-through cable.2. A rollover cable should be used in place of the straight-through cable.3. The subnet masks should be set to 255.255.255.192.4. A default gateway needs to be set on each host.5. The subnet masks should be set to 255.255.255.0. 3 and 4 only 1 and 5 only 2 only 1 only 2 and 5 only 3 and 4 only 1 and 5 only 2 only 1 only 2 and 5 only ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS