Measurement and Instrumentation Which of the quantity consists of unit as kg m/sec ? Acceleration Impulse Momentum Speed Acceleration Impulse Momentum Speed ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An instrument to be used for measurement and control should preferably have Dead zone and dead time Linear output and fast response Non-linear output A highly damped response Dead zone and dead time Linear output and fast response Non-linear output A highly damped response ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In induction type ammeter, _____ damping is provided. None of the listed here Fluid friction Air friction Eaddy current None of the listed here Fluid friction Air friction Eaddy current ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Ratio of readings of two wattmeter connected to measure power in a balanced 3-phase load is 5:3 and the load is inductive. The power factor at load is 0.917 lag. 0.6 lead. 0.6 lag. 0.917 lead. 0.917 lag. 0.6 lead. 0.6 lag. 0.917 lead. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A 150 V moving iron voltmeter of accuracy class 1-0 reads 75 V when used in a circuit under standard condition. The maximum possible percentage error in the reading is 1% 2.5% 2% 1.5% 1% 2.5% 2% 1.5% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 10.6 V. 11.1 V. 12.6 V. 15 V. 10.6 V. 11.1 V. 12.6 V. 15 V. ANSWER DOWNLOAD EXAMIANS APP