Electrical Machines Which of the following starter is sufficient to start the DC series motor ? 4 point starter All of these 3 point starter 2 point starter 4 point starter All of these 3 point starter 2 point starter ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The DC generator runs at a speed of 1000 rpm and flux per pole is 0.2 Wb, number of poles are 2 the winding is wave wound and having 480 conductors. The critical speed is 1200 rpm. Then the generated emf ( Eg ) 1500 Volt. 1600 Volt. 2000 Volt. 0 Volt. 1500 Volt. 1600 Volt. 2000 Volt. 0 Volt. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The compensating winding in a DC machine is located on pole shoes to avoid the sparking at the brushes. is located on pole shoes for avoiding the flashover at the commutator. is located in armature slots for compensation of the armature reaction. is located on commutating poles for improving commutation. is located on pole shoes to avoid the sparking at the brushes. is located on pole shoes for avoiding the flashover at the commutator. is located in armature slots for compensation of the armature reaction. is located on commutating poles for improving commutation. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 220 V DC generator is run at full speed without any excitation. The open circuit voltage will be 220 V. zero. about 2 V. about 50 V. 220 V. zero. about 2 V. about 50 V. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The rotor of a 3 - Φ wound induction motor is provided with heavy short-circuited end rings. three phase winding. heavy copper or aluminium bars placed in rotor slots. single phase winding. heavy short-circuited end rings. three phase winding. heavy copper or aluminium bars placed in rotor slots. single phase winding. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The maximum power developed in cylindrical synchronous machine is occurs at a load angle of 0o. Greater than 90o. 90o. less than 90o. 0o. Greater than 90o. 90o. less than 90o. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS