Computer Networking Which of the following protocols support VLSM, summarization, and discontiguous networking?1. RIPv12. IGRP3. EIGRP4. OSPF5. BGP6. RIPv2 2 and 5 All of these 1 and 4 3, 4 and 6 2 and 5 All of these 1 and 4 3, 4 and 6 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking To enable RIPng, which of the following would you use? Router1(config-if)# ipv6 ospf 10 area 0.0.0.0 Router1(config-rtr)# no shutdown Router1(config-if)# ipv6 router rip 1 Router1(config)# ipv6 router eigrp 10 Router1(config-if)# ipv6 ospf 10 area 0.0.0.0 Router1(config-rtr)# no shutdown Router1(config-if)# ipv6 router rip 1 Router1(config)# ipv6 router eigrp 10 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking What does the passive command provide to dynamic routing protocols? Stops an interface from sending or receiving periodic dynamic updates. Stops the router from receiving any dynamic updates. Stops an interface from sending periodic dynamic updates but not from receiving updates. Stops the router from sending any dynamic updates. Stops an interface from sending or receiving periodic dynamic updates. Stops the router from receiving any dynamic updates. Stops an interface from sending periodic dynamic updates but not from receiving updates. Stops the router from sending any dynamic updates. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Computers cannot communicate with each other directly over telephone lines because they use digital pulses whereas telephone lines use analog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? Interface Teleprocessor None of these Attenuation Modem Interface Teleprocessor None of these Attenuation Modem ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Your company is running IGRP using an AS of 10. You want to configure EIGRP on the network but want to migrate slowly to EIGRP and don't want to configure redistribution. What command would allow you to migrate over time to EIGRP without configuring redistribution? router eigrp 11 router eigrp 10 router igrp combine eigrp 10 router eigrp 10 redistribute igrp router eigrp 11 router eigrp 10 router igrp combine eigrp 10 router eigrp 10 redistribute igrp ANSWER DOWNLOAD EXAMIANS APP
Computer Networking The signal to noise ratio for a voice grade line is 30.1 dB (decibels) or a power ratio of 1023:1. The maximum achievable data rate on this line whose spectrum ranges from 300 Hz to 4300 Hz is 31000 bps 34000 bps None of these 6200 bps 9600 bps 31000 bps 34000 bps None of these 6200 bps 9600 bps ANSWER DOWNLOAD EXAMIANS APP