Polymer Technology Which of the following polymers shows the highest anti-tacking properties? Phenolic resin Alkyd resin Melamine formaldehyde resin Epoxy resin Phenolic resin Alkyd resin Melamine formaldehyde resin Epoxy resin ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butediene rubber) are 50°C and 1 kgf/cm² 250°C and 1 kgf/cm² 50°C and 3 - 4 kg/cm² 250°C and 10 kgf/cm² 50°C and 1 kgf/cm² 250°C and 1 kgf/cm² 50°C and 3 - 4 kg/cm² 250°C and 10 kgf/cm² ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. Polyvinyl acetate Rayon Polythene PVC Polyvinyl acetate Rayon Polythene PVC ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology The only natural thermoplastic resin, which is a product of animal life is Copal Amber Shellac Rosin Copal Amber Shellac Rosin ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Cross linked polymers are Thermosetting Thermoplastic Either A or B Fibres only Thermosetting Thermoplastic Either A or B Fibres only ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Addition polymerisation is not involved in the manufacture of Low density polythene Polyhexamethylene adipamide Poly vinyl chloride Polystyrene Low density polythene Polyhexamethylene adipamide Poly vinyl chloride Polystyrene ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS