Computer Networking Which of the following network types have a designated router and a backup designated router assigned? 1. Broadcast 2. Point-to-point 3. NBMA 4. NBMA point-to-point 1 and 3 All of these 1, 2 and 3 3 and 4 1 and 3 All of these 1, 2 and 3 3 and 4 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You want to run the new 802.1w on your switches. Which of the following would enable this protocol? Switch(config)# spanning-tree mode rapid-pvst Switch# spanning-tree mode 802.1w Switch# spanning-tree mode rapid-pvst Switch(config)# spanning-tree mode 802.1w Switch(config)# spanning-tree mode rapid-pvst Switch# spanning-tree mode 802.1w Switch# spanning-tree mode rapid-pvst Switch(config)# spanning-tree mode 802.1w ANSWER DOWNLOAD EXAMIANS APP
Computer Networking The standard suit of protocols used by the Internet, intranets, extranets, and some other networks. Open Systems Protocol TCP/IP Hybrid hub Internetwork processor Open Systems Protocol TCP/IP Hybrid hub Internetwork processor ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain? VTP STP DHCP ISL VTP STP DHCP ISL ANSWER DOWNLOAD EXAMIANS APP
Computer Networking A network administrator is connecting hosts A and B directly through their Ethernet interfaces, as shown in the illustration. Ping attempts between the hosts are unsuccessful. What can be done to provide connectivity between the hosts?1. A crossover cable should be used in place of the straight-through cable.2. A rollover cable should be used in place of the straight-through cable.3. The subnet masks should be set to 255.255.255.192.4. A default gateway needs to be set on each host.5. The subnet masks should be set to 255.255.255.0. 1 and 5 only 3 and 4 only 1 only 2 and 5 only 2 only 1 and 5 only 3 and 4 only 1 only 2 and 5 only 2 only ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You type show running-config and get this output:[output cut]Line console 0 Exec-timeout 1 35 Password BIXPASSWD Login[output cut]What do the two numbers following the exec-timeout command mean? If no commands have been typed in 1 minute and 35 seconds, the console connection will be closed. If you're connected to the router by a Telnet connection, input must be detected within 1 minute and 35 seconds or the connection will be closed. If no command has been typed in 35 seconds, the console connection will be closed. If no router activity has been detected in 1 hour and 35 minutes, the console will be locked out. If no commands have been typed in 1 minute and 35 seconds, the console connection will be closed. If you're connected to the router by a Telnet connection, input must be detected within 1 minute and 35 seconds or the connection will be closed. If no command has been typed in 35 seconds, the console connection will be closed. If no router activity has been detected in 1 hour and 35 minutes, the console will be locked out. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS