Chemical Reaction Engineering Which of the following curves shows the effect of temperature on the extent of gas-solid adsorption at a given pressure? Freundlich adsorption isotherm Adsorption isobar Langmuir adsorption isotherm None of these Freundlich adsorption isotherm Adsorption isobar Langmuir adsorption isotherm None of these ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m³ is fed to the reactor at the rate of 0.01 m³ /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k)is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) 1000 500 600 400 1000 500 600 400 ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering The fractional volume change of the system for the isothermal gas phase reaction, A 3B , between no conversion and complete conversion is 2 1 0.5 3 2 1 0.5 3 ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering A backmix reactor Is most suitable for gas phase reaction Is same as ideal stirred tank reactor Employs mixing in axial direction only Is same as plug-flow reactor Is most suitable for gas phase reaction Is same as ideal stirred tank reactor Employs mixing in axial direction only Is same as plug-flow reactor ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering Signal normally used to study non-ideal flow by stimulus response technique is __________ input. Both A & B Neither A nor B Step Pulse Both A & B Neither A nor B Step Pulse ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering The value of steric factor 'P' in the equation k = PZeE/RT usually ranges from None of these 0.1 to 0.9 L.0 to 10⁻⁸ L.l.to 10² None of these 0.1 to 0.9 L.0 to 10⁻⁸ L.l.to 10² ANSWER DOWNLOAD EXAMIANS APP