Furnace Technology Which furnace employs preheating, heating and soaking zones? Open hearth furnace Reheating furnace Soaking pit Cupola Open hearth furnace Reheating furnace Soaking pit Cupola ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology The purpose of controlling the furnace atmosphere is to prevent surface attack by Either of the above Decarburising Sulphur penetration Oxidation/scaling Either of the above Decarburising Sulphur penetration Oxidation/scaling ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Reverberatory furnace is used for Steel melting Roasting/reduction of ores Heating air Annealing steel coil Steel melting Roasting/reduction of ores Heating air Annealing steel coil ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. Covered Sidefired Underfired Recirculating Covered Sidefired Underfired Recirculating ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Dampers are located Anywhere after the I.D. fan Before the I.D fan After the I.D. fan Near the top of the chimney Anywhere after the I.D. fan Before the I.D fan After the I.D. fan Near the top of the chimney ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Ingress of cold air in the furnaces through cracks, charging doors, openings etc. Reduces the furnace draught Reduces the flue gas temperature and makes the furnace atmosphere oxidising Increases the load on the induced draft fan All of these Reduces the furnace draught Reduces the flue gas temperature and makes the furnace atmosphere oxidising Increases the load on the induced draft fan All of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS