DC Generators When two D.C. series generators are running in parallel, an equalizer bar is used So that two similar machines will pass approximately equal currents to the load To reduce the combined effect of armature reaction of both machines To increase the speed and hence generated e.m.f. To increase the series flux So that two similar machines will pass approximately equal currents to the load To reduce the combined effect of armature reaction of both machines To increase the speed and hence generated e.m.f. To increase the series flux ANSWER DOWNLOAD EXAMIANS APP
DC Generators A 4-pole , lap wound dc shunt generator has an armature winding consisting of 220 turns each of 0.004 Ω. The armature resistance is 0.055 Ω 1 Ω 0.025 Ω 0.5 Ω 0.055 Ω 1 Ω 0.025 Ω 0.5 Ω ANSWER DOWNLOAD EXAMIANS APP
DC Generators The terminal voltage of a series generator is 150 V when the load current is 5 A. If the load current is increased to 10 A, the terminal voltage will be Less than 150 V None of these 150 V Greater than 150 V Less than 150 V None of these 150 V Greater than 150 V ANSWER DOWNLOAD EXAMIANS APP
DC Generators If the value of shunt field resistance of a shunt generator is greater than the critical resistance, the generator will Excite to one half of full voltage Excite to full voltage Fail to excite None of the listed here Excite to one half of full voltage Excite to full voltage Fail to excite None of the listed here ANSWER DOWNLOAD EXAMIANS APP
DC Generators In a dc generator, armature reaction _____ pole tip. None of the listed here Weaknes the flux at the leading Weaknes the flux at the trailing Strengthns the flux at the leading None of the listed here Weaknes the flux at the leading Weaknes the flux at the trailing Strengthns the flux at the leading ANSWER DOWNLOAD EXAMIANS APP
DC Generators Magnetic field in a D.C. generator is produced by Permanent magnets None of these Electromagnets Both (A) and (B) Permanent magnets None of these Electromagnets Both (A) and (B) ANSWER DOWNLOAD EXAMIANS APP