Analog Electronics When the JFET is no longer able to control the current, this point is called the saturated point. pinch-off region. depletion region. breakdown region. saturated point. pinch-off region. depletion region. breakdown region. ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics When a reverse bias is applied to gate of JFET the depletion region width None of these is wider near the source and tapers near the drain. is wider near the drain and tapers near source. is uniform in the channel. None of these is wider near the source and tapers near the drain. is wider near the drain and tapers near source. is uniform in the channel. ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics One of the following is the primary function of an oscillator generates non sinusoidal waveforms generates sustained oscillations at a constant amplitude and specific frequency produces sinusoidal oscillations None of these generates non sinusoidal waveforms generates sustained oscillations at a constant amplitude and specific frequency produces sinusoidal oscillations None of these ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics The encapsulation of transistor is necessary for Mechanical ruggedness Avoiding loss of free electrons Preventing photo-emission effects Preventing radio interference Mechanical ruggedness Avoiding loss of free electrons Preventing photo-emission effects Preventing radio interference ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics An amplifier using an opamp with slew rate SR=1v/µsec has a gain of 40db.if this amplifier has to faithfully amplify sinusoidal signals from dc to 20 KHz without introducing any slew-rate induced distortion, then the input signal level must not exceed 79.5 mV 795mV 395mV 39.5mV 79.5 mV 795mV 395mV 39.5mV ANSWER DOWNLOAD EXAMIANS APP
Analog Electronics Thermal runaway is not possible in FET because as the temperature of FET increases The drain current increases None of these The transconductance increases The mobility decreases The drain current increases None of these The transconductance increases The mobility decreases ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS