Computer Hardware When configuring is a network interface cards without jumpers or plug and play, what is used to set the IRQs? DMA the OS configuration software CMOS None of these DMA the OS configuration software CMOS None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware Which step should you perform first before discharging a CRT? Remove the CRT from its housing Turn power off before removing power source Disconnect the CRT from the computer Remove the video assembly Remove the CRT from its housing Turn power off before removing power source Disconnect the CRT from the computer Remove the video assembly ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To install a second IDE drive into a computer, you must Use the IDE configuration software to set the new drive as slave Verify that you attach the drive to the connector at the end of the ribbon cable Verify that you define the new drive as D: in the CMOS setup Set the master-slave jumper to slave on the second drive Use the IDE configuration software to set the new drive as slave Verify that you attach the drive to the connector at the end of the ribbon cable Verify that you define the new drive as D: in the CMOS setup Set the master-slave jumper to slave on the second drive ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What's the best way to prevent damaging your PC with static electricity? periodically touch a safe ground point on the PC to discharge yourself wear leather soled shoes place your PC on a rubber mat wear an ESD wrist strap periodically touch a safe ground point on the PC to discharge yourself wear leather soled shoes place your PC on a rubber mat wear an ESD wrist strap ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the: System's power supply Floppy drive ribbon cable Original IDE controller None of these System's floppy drive device driver System's power supply Floppy drive ribbon cable Original IDE controller None of these System's floppy drive device driver ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware Which REQUIRES an anti-static bag for transport? Power supply None of these Monitor Floppy disks I/O controller Power supply None of these Monitor Floppy disks I/O controller ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS