Computer Networking What does the command o/r 0x2142 provide? It is used to bypass the configuration in NVRAM. It is used to restart the router. It is used to enter ROM Monitor mode. It is used to view the lost password. It is used to bypass the configuration in NVRAM. It is used to restart the router. It is used to enter ROM Monitor mode. It is used to view the lost password. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking With an IP address set starting with 150, you currently have six offices that you are treating as subnets. Plans are in place to open 10 more offices before the end of the year. What subnet mask should you use to satisfy the needed number of subnets and maximize the number of hosts available at each site? 252 192 240 248 224 252 192 240 248 224 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking What does the passive command provide to dynamic routing protocols? Stops an interface from sending or receiving periodic dynamic updates. Stops the router from receiving any dynamic updates. Stops the router from sending any dynamic updates. Stops an interface from sending periodic dynamic updates but not from receiving updates. Stops an interface from sending or receiving periodic dynamic updates. Stops the router from receiving any dynamic updates. Stops the router from sending any dynamic updates. Stops an interface from sending periodic dynamic updates but not from receiving updates. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Using the illustration from the previous question, what would be the IP address of SO if you were using the first subnet? The network ID is 192.168.10.0/28 and you need to use the last available IP address in the range. Again, the zero subnet should not be considered valid for this question. 192.168.10.62 192.168.10.127 192.168.10.30 192.168.10.24 192.168.10.62 192.168.10.127 192.168.10.30 192.168.10.24 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which of the following is true when describing a link-local address? These are like private addresses in IPv4 in that they are not meant to be routed. These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4. Packets addressed to a unicast address are delivered to a single interface. These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap. These are like private addresses in IPv4 in that they are not meant to be routed. These are your typical publicly routable addresses, just like a regular publicly routable address in IPv4. Packets addressed to a unicast address are delivered to a single interface. These addresses are meant for nonrouting purposes, but they are almost globally unique so it is unlikely they will have an address overlap. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which command will show you all the translations active on your router? show ip nat statistics clear ip nat translations * show ip nat translations debug ip nat show ip nat statistics clear ip nat translations * show ip nat translations debug ip nat ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS