Computer Networking
You have the following routing table. Which of the following networks will not be placed in the neighbor routing table?R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0C 192.168.40.0/24 is directly connected, Serial0 172.16.0.0/24 is subnetted, 1 subnetsC 172.16.30.0 is directly connected, Loopback0R 192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0R 10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0C 192.168.50.0/24 is directly connected, Ethernet0

10.0.0.0
All of them will be placed in the neighbor routing table
192.168.30.0
172.16.30.0

ANSWER DOWNLOAD EXAMIANS APP

Computer Networking
You connect a host to a switch port, but the new host cannot log into the server that is plugged into the same switch. What could the problem be?

The switch port the host is connected to is not configured to the correct VLAN membership.
The router is not configured for the new host.
The host has an invalid MAC address.
The VTP configuration on the switch is not updated for the new host.

ANSWER DOWNLOAD EXAMIANS APP

Computer Networking
You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?

They will all load-balance.
The route has a delay of 16 microseconds.
The route is 16 hops away.
The route is inaccessible.
The route is queued at 16 messages a second.

ANSWER DOWNLOAD EXAMIANS APP

Computer Networking
If you configure the TCP/IP address and other TCP/IP parameters manually, you can always verify the configuration through which of the following? Select the best answer.

Server Services dialog box
Advanced Properties tab of TCP/ IP Info.
None of these
Network Properties dialog box
DHCPINFO command-line utility

ANSWER DOWNLOAD EXAMIANS APP